Our CBD Manufacturing Process | From Start to Finish

The manufacturing process of CBD begins with the cultivation of hemp plants and ends with the extraction and refinement of CBD oil. Through this article, we aim to provide you with a comprehensive understanding of our CBD manufacturing process, showcasing our commitment to sustainable practices and the positive impact hemp-based products can have on both the environment and society.

From the careful preparation of the soil to the quality testing of the dried hemp, we take you through each step with a focus on sustainable approaches and the potential health benefits associated with CBD oil.

How is CBD Oil manufactured?

When it comes to manufacturing CBD, the process begins with extracting the compound from the plant. This extraction can be done using various methods, such as CO2 hemp extraction or other solvent extraction.

It is important to note that CBD is predominantly derived from hemp plants, as they have a higher concentration of the compound compared to other cannabis plants.

Additionally, CBD is considered a natural compound, as it is extracted from the plant without any synthetic additives.

How is CBD extracted from the plant?

CBD is extracted from the hemp plant using various methods, such as ethanol extraction, CO2 extraction, and water extraction, each with its own advantages and considerations. 

  • Ethanol extraction involves soaking the plant material in ethanol or high-proof alcohol to draw out cannabinoids and other beneficial compounds. This method is efficient for extracting CBD and creating full spectrum extracts, but it requires refinement and filtration. 
  • CO2 extraction, on the other hand, is the most advanced and widely used method. It uses pressurized carbon dioxide to extract desired compounds, allowing for the isolation, capture, and research of cannabinoids. 
  • Water extraction, which can use water vapor or ice, is an inexpensive method with high yield if done correctly, but it can be time-consuming. The industry is moving towards cleaner extraction methods.
Extraction MethodAdvantagesConsiderations
Ethanol ExtractionOldest form of extractionEfficient for extracting CBDScalable and obtainable at small scaleRequires refinement and filtration methodsAims to extract all cannabinoids, not just CBD
CO2 ExtractionMost advanced and widely used methodAllows isolation, capture, and research of cannabinoidsResults based on temperature and pressureYields a different end-product with more cannabinoids
Water ExtractionInexpensive method with high yield if done correctlyResults in a very fine extractNot simple to practice and can be time-consumingIndustry moving towards cleaner extraction methods

Does all CBD come from hemp?

CBD can be derived from both hemp and marijuana plants, but the majority of CBD products on the market are made from hemp-derived CBD. Hemp is a variety of the cannabis plant that contains low levels of THC, the psychoactive compound found in marijuana.

CBD manufacturers typically extract CBD from the flowers, leaves, and stems of hemp plants through extraction methods mentioned above.

Is CBD synthetic or natural?

Manufacturing CBD involves the extraction and refinement of cannabinoids from hemp plants, resulting in a natural and potent product. CBD extraction processes typically involve using methods like CO2 extraction, which is known for its efficiency and ability to preserve the integrity of the cannabinoids.

This process involves using pressurized carbon dioxide to extract the CBD from the hemp plant, resulting in a pure and concentrated oil. 

It is important to note that CBD can be both synthetic and natural. Synthetic CBD is a chemical-based formula that mimics the effects of real CBD but can have unwanted side effects. On the other hand, natural CBD oil is derived from hemp plants and contains all the beneficial compounds found in the plant, offering a more holistic approach to CBD consumption.

Are CBD products profitable?

The profitability of CBD products is a topic of interest for many aspiring entrepreneurs. Starting a CBD business can be lucrative, but it requires careful consideration and strategic planning.

Key factors to consider include the type of business model (white label or private label), selecting a reputable CBD manufacturer, and understanding the market demand and competition.

Can I start my own CBD business?

Starting your own CBD business can be a lucrative venture in today’s rapidly growing market. Here are four reasons why starting a CBD business can be profitable:

  • Increasing consumer demand: CBD products have gained popularity due to their potential health benefits and natural properties. With more people seeking alternative remedies and wellness products, the demand for CBD is on the rise.
  • Growing market: According to The Globe and Mail, CBD market is expected to reach $16 billion by 2025, indicating significant growth opportunities for businesses in this industry.
  • Diverse product offerings: Products come in various forms such as oils, edibles, topicals, and more. This allows you to cater to a wide range of customer preferences and needs.
  • Strong customer loyalty: CBD users often report positive experiences and results, leading to strong customer loyalty. Building a loyal customer base can contribute to the long-term success of your CBD business.

What is the difference between White label and Private Label CBD?

With the increasing demand and profitability of CBD products, you definitely need to understand the difference between white-label and private label CBD in order to make informed business decisions. 

White label CBD products allow multiple businesses to sell the same CBD products under their own branding, providing an easy market entry with low overhead costs and access to manufacturing expertise. 

On the other hand, private label CBD products are based on a unique formulation specific to a brand, offering control over the manufacturing process, flexibility in product formulation, and a higher potential for brand loyalty compared to white labeling. 

The table below summarizes the key differences between white label and private label CBD products:

White Label CBD ProductsPrivate Label CBD Products
Identical formulas sold by multiple companiesUnique formulations specific to a brand
Easy market entry with low overhead costsControl over manufacturing process
Access to manufacturing expertiseFlexibility in product formulation
Compliance guidance for CBD productsAbility to cater to customer preferences
Higher potential for brand loyalty

How to choose best CBD Manufacturer

In order to ensure  quality and profitability of your CBD products, you need to Choose a high quality CBD manufacturer, who follows a reliable manufacturing process. 

Here are five key factors to consider when choosing a CBD manufacturer:

  1. Certification and quality of raw materials: Look for manufacturers with ISO, cGMP, and GMP certifications, which indicate standardized practices and quality management. These certifications ensure that your manufacturer follows strict guidelines for production transparency and safety.
  2. Extraction methods: Different extraction methods, such as CO2 extraction, distillation, and isolate extraction, have their advantages and considerations. Choose a manufacturer that uses a safe and efficient extraction method, so the quality and purity of your end product is best possible.
  3. Third-party lab testing: Ensure that the manufacturer conducts third-party lab testing to comply with regulations and provide transparent information about the product’s quality and potency.
  4. Supply chain transparency: Familiarize yourself with the manufacturer’s supply chain to understand where the raw materials are sourced from and how they are processed. This will help you ensure the reliability and consistency of the products.
  5. Reputation and customer reviews: Research the manufacturer’s reputation in the industry and read customer reviews to gauge the satisfaction of their previous clients. This will give you insights into the manufacturer’s reliability and the quality of their products.

How do you label CBD products?

The label of CBD products should include important information such as the brand name, business address, product identification, ingredient list, date tested, lab name and test number confirmation, net weight, CBD and THC percentages, and warning statements.

Additionally, packaging for CBD products should be designed to be tamper-evident and child-resistant.

What is on the label of CBD ingredients

While CBD labels may vary in format, there are key elements to look for.

  • Third-party verification is an important factor, as reputable companies often provide a QR code on their label that can be scanned to view a certificate of analysis. This analysis confirms the contents of the CBD product, ensuring that the listed ingredients and quantities are accurate.
  • The label may also indicate the type of CBD oil used, such as full spectrum CBD, broad spectrum CBD, or CBD isolate. It is crucial to know whether the CBD is hemp or marijuana derived, as marijuana-derived products may contain higher levels of THC, which can have legal implications and show up on drug tests.
  • Additionally, it should clearly state the amount of CBD in the entire product as well as the amount per serving. Pay attention to the serving size to accurately calculate the CBD intake.
  • The ingredients list is also important, as it reveals any additional components, such as carrier oils or sweeteners, that may be present.
  • Lastly, the manufacturing date provides information on the freshness of the product.

How do you package CBD?

When it comes to packaging CBD, there are several important considerations to keep in mind:

  • Choose the right packaging materials: Different CBD products may require different types of packaging materials. For example, glass containers are often used for preserving oils and tinctures, while metal cans are suitable for energy drinks and carbonated beverages.
  • Ensure product freshness and integrity: Proper sealing and packaging techniques are crucial to maintain the quality and freshness of CBD products. Vertical seal packaging solutions can be used to ensure the integrity of the products.
  • Comply with legal regulations: CBD packaging should comply with FDA regulations and avoid making unsubstantiated health claims. It is important to include general label information, such as contents, ingredients, batch codes, and usage instructions.
  • Reflect the brand image: The packaging design should align with the brand image and target audience. It should convey a sense of quality and professionalism to instill confidence in consumers.
  • Provide clear and accurate information: Clear and accurate labeling is essential for CBD products. This includes providing information about the product’s CBD content, whether it is pure CBD or a full-spectrum extract, and any additional ingredients or additives.

Can CBD products be mailed?

CBD products can be mailed as long as they comply with legal regulations and labeling requirements. When shipping CBD products, it is crucial to ensure that they contain less than 0.3% THC, as mandated by US federal law.

Additionally, the products should be sourced from licensed growers and undergo third-party testing to determine their chemical makeup, including CBD and THC levels. Proper labeling is also essential for compliance and transparency. Labels should clearly indicate the CBD content, THC content, and other ingredients, as well as provide information such as the batch number, manufacturing date, and expiration date.

Adhering to these regulations and labeling requirements ensures that CBD products can be safely and legally mailed to consumers.

Reach out we will be excited to talk about the project!